Frequently Asked Questions

F.A.Q.

Can the Kulick Industries Abutment System Really be Screw-Retained at Any Angle?

Unlike other abutment systems that are limited to a certain degree angle, the Kulick Industries abutment system works with ANY angle. In fact, you can correct any angled implant – not just buccal-lingual but also mesio-distally, if needed. In other words, the use of cement is NEVER necessary.

Do I Need Any Special Tools to Use the Kulick Industries Abutment System?

Mini drill press or micro hand drill (with bits and taps) required but not included.

Which implants are compatible with the Kulick Industries abutment system?

We currently have UCLA abutments that are compatible with the following systems: Straumann NC, Straumann RC, Zimmer 3.5, Nobel Active NP, and Nobel Active RP. However, the platforms and secondary cylinders can be purchased separately and used with any UCLA abutment.

What if There is a Porcelain Fracture or Tooth Movement Opening Up Contacts?

Well, you are in luck. Because the Kulick Industries abutment system is truly screw-retained, every case can be easily disassembled.

What About the Torque of the Implant Abutment?

With the Kulick Industries abutment system, you can torque the implant abutment to proper specifications.

How Big is the Screw Opening?

Purposefully, the screw opening with the Kulick Industries abutment system was designed very small. This was done to ensure that you can place it ANYWHERE you want. Platforms will be available with either 1.4mm or 2.0mm hole diameters.

What about Multi-Unit Prosthesis?

Of course, the Kulick Industries abutment system can work with multi-unit prosthesis! All UCLA abutments are engaging.

Are the Abutments Engaging?

Of course, the abutments are engaging. Naturally, we made the abutments engaging to ensure a tighter interface between the abutment and the implant. The result of this is a decrease in loosening.

Can the Kulick Industries Abutment System Correct Lateral Deviations?

By now you should know the answer. But if you don’t, the Kulick Industries abutment system can certainly correct lateral deviations.

Can the Kulick Industries Abutment System be Used With Bar Restorations?

Yes, the Kulick Industries abutment system can be used with bar restorations.

Does the Surgeon Have to Place the Implant Lingually to Try and Make the Screw Not Visible?

Not with the Kulick Industries abutment system, no. The platform was designed to place the screw access hole in an ideal position.

Is the Kulick Industries Abutment System Expensive?

It is more affordable than cutting off a crown and replacing it!

Where can I buy the Kulick Industries Abutment System?

Currently, the Kulick Industries abutment system is exclusively sold by Kulick Industries through our online shop. We offer custom shipping options, check us out!

What is the Advantage of the Kulick Abutment System Over the Channel System?

1. You have direct access to the implant abutment screw.

2. Can correct any lateral deviations.

3. The access home is smaller.

Location

8241 NW 49th Court
Coral Springs, FL 33067

Email

info@kulickindustries.com

Hours of Operation

M-F: 8am - 5pm